LevelBlue Knowledge Base

KB Home Search Latest Additions Most Popular

Knowledgebase

Home » Knowledgebase » Legacy Products » Secure Web Gateway » Installations » INFO: NG-8000 Management Module SNMP always requires IP Address /...

INFO: NG-8000 Management Module SNMP always requires IP Address / Host Name

Show/Hide Article Tools

Description
Within the NG-8000 Management Module it is necessary to enter at least one IP address when configuring SNMP Get. If you enter a community name and specify SNMP Get, and you do not enter an IP address, the SNMP V1 agent will be disabled automatically.

Symptoms
SNMPv1 is disabled when applying SNMP settings in the Management Module GUI if no IP address is entered.

Cause
There should be an SNMP server IP address / Host name defined, so all Get requests will be sent to it.

Solution
Enter an IP address when configuring SNMP GET.

VSOS
All software versions

This article applies to:: NG 8000

This article was previously published as:
Finjan KB 1310

To contact LevelBlue about this article or to request support:

Create a case through the Fusion portal (U.S. Government customers, use the TGS Fusion portal).

Call us on a local phone number.

Rate this Article:

Tags:
8.3.5, 8.4.0, 8.4.3, 8.5.0, NG 8000

Add Your Comments

Comment submission is disabled for anonymous users.
Please send feedback to Trustwave Technical Support or the Webmaster.

Execution: 0.071. 8 queries. Compression Disabled.