This article applies to:

• WFR/WF

Question:

• What ports do I need for authentication to work and filter settings?

Information:

The following link will have more details on this topic.

https://support.levelblue.com/software/8e6/docs/ug/wf.ug.5.0.20.auth-121119.pdf

Below is a list of ports and settings. Please review the link above for all details.

Table 2 describes the various authentication types.

Table 3 describes the ports used.

Port 139 must be open to get authentication working, test on a PC by telnet x.x.x.x 139 The x is your virtual ip (VIP) in System>Authentication>Settings This reserved ip must be on the same subnet as your management ip.